Hydraulic Equipment

Durapac high-pressure hydraulic equipment for lifting, pressing, pulling and bolting. Jacks, cylinders, pumps and tools, plus the fittings and hoses that connect them.

Hydraulic Jacks

Mobile, bottle, toe and rail jacks.

Track Pin Pushers

Remove and install track pins in the field.

Hydraulic Cylinders

Single-acting, double-acting, low-profile and pull.

Pumps & Power Units

Hand, electric and battery power.

Hydraulic Tools

Torque wrenches, spreaders, pullers and more.

Hydraulic Presses

Bench and H-frame presses.

Air Bags

Low-height pneumatic lifting.

System Accessories

Fittings, hoses, gauges, oil and valves.

High Pressure Hydraulic Fittings

DFZ-series adaptors, elbows, tees, nipples and swivels rated to 700 bar for connecting hydraulic systems.

View →

HP-10 Bench Press

A 10 ton bench-top hydraulic press with a two-speed hand pump for shop pressing work.

View →

KPL Air Bags

Kevlar-reinforced high-pressure air bags for lifting from as little as 26 mm of clearance.

View →

P-Series Hand Pumps

Steel and aluminum hand pumps for single- and double-acting tools, rated from 3,480 to 40,600 psi.

View →

RG General Purpose Single-Acting Cylinders

Spring-return collar thread cylinders from 5 to 100 ton for jacking, maintenance, production and fabrication work.

View →

SDL Safe-D-Lock Jacks with Powerdrive

Self-propelled high-tonnage lifting jack and rated vehicle stand for heavy mining trucks and earthmoving equipment.

View →

TTP Track Pin Pushers

Portable 700 bar track pin presses for removing and installing track pins on tracked machines, in the field or shop.

View →

EC SDL Extra Compact “Dozer” Jack

A shorter, narrower Safe-D-Lock jack and rated stand for dozers and low, narrow jacking points.

View →

HDP Heavy Duty H-Frame Presses

Welded heavy-duty H-frame presses in 50 and 100 ton, supplied with an electric/hydraulic power unit.

View →

HPS High Pressure Hydraulic Hoses

Thermoplastic 1/4" and 3/8" HPS hoses rated to 10,000 psi, in lengths from 1 to 30 m.

View →

RHS Hollow Plunger Single-Acting Cylinders

Spring-return hollow plunger cylinders, 12 to 100 ton, for pulling rod or cable through the cylinder.

View →

SPE Electric Power Units

Compact, portable electric pumps for 10,150 psi cylinders, with manual or solenoid valve options.

View →

ALJ Pneumatic Lifting Jacks

Air-driven hydraulic floor jacks, 30 to 80 ton, for trucks, buses and heavy vehicles in the shop.

View →

BP Battery Power Units

Cordless battery pumps for 700 bar tools, with Bluetooth and corded remotes and a full-shift battery.

View →

DHO Hydraulic Oil

Premium anti-wear hydraulic oil for jacks, cylinders and pumps, in 1, 5 and 20 liter containers.

View →

RSLC High Tonnage Locking Collar Cylinders

Single-acting high tonnage cylinders, 50 to 1,000 ton, with a lock ring that holds the load mechanically.

View →

BLJ Battery Lifting Jacks

Cordless two-stage vehicle jacks run by an 18V lithium battery, so no airline or power cord is needed.

View →

DBP-120M Battery Power Unit

Lightweight pump for 10,150 psi single-acting tools, powered by Makita 18 V batteries.

View →

Hydraulic Pressure Gauges & Adapters

Liquid-filled analog and PGD-75 digital pressure gauges, plus FGA gauge adapters for high-pressure systems.

View →

RLP Low Profile Single-Acting Cylinders

Spring-return low profile cylinders, 10 to 100 ton, that fit into tight spaces while keeping usable stroke.

View →

DBJ Bottle Jacks

Heavy-duty hydraulic bottle jacks from 10 to 50 ton, including the air/manual DBJ-20A.

View →

DET & DAT Torque Wrench Power Units

Three-stage electric and air power units built to run TW and LPC hydraulic torque wrenches.

View →

Hydraulic Couplings

Screw, snap and gauge couplings with dust caps for connecting 700 bar hoses, cylinders and gauges.

View →

RFJ Flat Jack Cylinders

Very low height spring-return flat jacks, 5 to 150 ton, for starting a lift in minimal clearance.

View →

DBW Back-Up Wrenches

Magnetic back-up wrenches that hold the opposite nut or bolt head during high-torque bolting.

View →

In-Line Flow & Pressure Control Valves

Needle, check, counterbalance, relief and ball valves plus needle-valve manifolds for 700 bar systems.

View →

RAP Aluminum Pull Cylinders

Lightweight spring-return aluminum pull cylinders, 10 to 50 ton, with removable clevis eyes.

View →

TJ Toe Jacks

Hydraulic toe jacks, 2 to 25 ton, for lifting machinery where there's little clearance under the load.

View →

Cylinder Seal Kits

Replacement seal kits for Durapac hydraulic cylinders. Send us your cylinder model for the right kit.

View →

DRJ Rail Jacks

Lightweight forged aluminum rail jacks for lifting, aligning and gauging rail and sleepers.

View →

RP Pull Cylinders

Compact spring-return pull cylinders, 2.5 and 5 ton, that work in any position.

View →

TQ Manual Torque Wrenches

Click-type manual torque wrenches from 3/8" to 1" drive, each supplied with a calibration certificate.

View →

ACD Aluminum Double-Acting Cylinders

Lightweight aluminum double-acting cylinders, 20 to 200 ton, for portable lifting and maintenance work.

View →

TW Square Drive Hydraulic Torque Wrenches

Square drive hydraulic torque wrenches from 82 to 53,280 ft-lb, accurate to within ±3%.

View →

ACHD Aluminum Hollow Double-Acting Cylinders

Lightweight aluminum hollow plunger cylinders, 30 to 100 ton, with hydraulic return for longer strokes.

View →

LPC Low-Profile Hydraulic Hex Torque Wrenches

Low-profile hydraulic hex torque wrenches with interchangeable cassettes for tight-clearance bolting.

View →

DHS Hydraulic Spreaders

Hydraulic wedge spreaders from 0.5 to 15 ton for flange spreading, lifting and leveling.

View →

RD Double-Acting Cylinders

Heavy-duty double-acting collar thread cylinders, 10 to 500 ton, for high-cycle lifting and pressing.

View →

DLW Hydraulic Lifting Wedges

18 ton hydraulic lifting wedges that fit a 9.5 mm gap to start lifts on heavy equipment.

View →

RDHG High Tonnage Double-Acting Cylinders

Double-acting high tonnage cylinders, 50 to 1,600 ton, for heavy jacking, civil work and stressing beds.

View →

DNS Hydraulic Nut Splitters

Seven hydraulic nut splitters for seized nuts from 10 to 75 mm across flats.

View →

RDP Precision Production Cylinders

High-precision double-acting cylinders, 4 to 25 ton, built for high-cycle production fixtures.

View →

BB Hydraulic Tire Bead Breakers

Air-hydraulic tire bead breakers for truck, agricultural and earthmover wheels, with 13.8 ton force.

View →

RHD Hollow Plunger Double-Acting Cylinders

Steel double-acting hollow plunger cylinders, 30 to 300 ton, for tensioning, testing and pulling work.

View →

DHP-50E 50 Ton High Tonnage Puller

Cart-mounted 50 ton hydraulic puller with electric two-speed pump for gears, wheels and press-fit parts.

View →

DHP-100E 100 Ton High Tonnage Puller

Cart-mounted 100 ton hydraulic puller for large gears, wheels, sleeves and press-fit components.

View →

DRP-100E Rail Bearing Remover / Installer

Portable hydraulic tool for removing and installing tapered roller bearings on railroad axle journals.

View →

Beyond the catalog

Not finding what you need?

Most projects aren't one size fits all. When the standard range doesn't cover your job, we put together equipment and systems built to your specifications.

See our custom assembly services →

Send us your specs

Share your system specifications or application requirements.

We source and build

We source reliable components from Durapac High Pressure Hydraulics and other suppliers to build your system.

Assembled and tested

Products are pre-assembled and tested before they ship to you.